Titanium Ball Valve
Titanium Ball Valve
Titanium Ball Valve
Titanium Ball Valve
Titanium Ball Valve
Titanium Plug Valve
Titanium Gate Valve (ANSI)
Titanium Gate Valve (DIN/EN)
Titanium Wedge Gate Valve
Titanium Wedge Gate Valve
Titanium Globe Valve (ANSI)
Titanium Globe Valve (DIN/EN)
Titanium Globe Valve
Titanium Globe Valve
Titanium Check Valve (ANSI)
Titanium Check Valve (DIN/EN)
Titanium Check Valve
Titanium Check Valve
Titanium Check Valve
Titanium Butterfly Valve
Titanium Strainer (ANSI)
Titanium Strainer (DIN/EN)
Titanium Spring Loaded Safety Valve
Titanium Spring Loaded Safety Valve
1.1 Titanium Gr. 2 (UNS R50400) valves are made of industrial pure titanium and can be used in conventional seawater, nitric acid, and media without significant crevice corrosion.
1.2 Titanium Gr. 3 (UNS R50550) valves are also made of industrial pure titanium with increased strength and can be used in higher-pressure seawater, nitric acid, and media without significant crevice corrosion.
1.3 Titanium Gr. 10 (UNS R58030) valves are made of Ti-Ni-Mo corrosion-resistant alloy, with significantly higher resistance to crevice corrosion than Titanium Gr. 2 (UNS R50400) and Titanium Gr. 3 (UNS R50550) valves. They can be used in geothermal well heat exchange pipelines, geothermal fluid transportation pipelines (typical scenario of high-temperature chlorinated brine), in situations with sealed gaps, and in high-temperature chloride +... 1. Equipment operating in weak acid environments (heat exchangers, tower internals), oil and gas, nearshore: sulfur-containing, low-temperature acidifying seawater equipment, hydrometallurgy, high-temperature brine systems in salt chemical industries.
2.1 Titanium Gr. 2 (UNS R50400) valves have insufficient corrosion resistance in weak reducing acids (dilute hydrochloric acid, dilute sulfuric acid) and high-temperature confined crevices, and are prone to crevice corrosion;
2.2 Titanium Gr. 2 (UNS R50400) valves cannot be heat-treated for strengthening; high-temperature strength decay is significant, and the long-term operating temperature generally does not exceed 315℃;
2.3 Titanium Gr. 3 (UNS R50550) valves have poor resistance to reducing acids and high-temperature crevice corrosion;
2.4 Titanium Gr. 10 (UNS R58030) valves are less effective than palladium alloy Titanium Gr. 7 valves in resisting strong reducing concentrated acids (concentrated hydrochloric acid, concentrated sulfuric acid); they are not suitable for extreme strong reducing conditions.
Titanium Gr. 2 Ball Valve;
Titanium Gr. 2 Instrument Ball Valve;
Titanium Gr. 2 Sleeve Plug Valve;
Titanium Gr. 2 Wedge Gate Valve;
Titanium Gr. 2 Globe Valve;
Titanium Gr. 2 Swing Check Valve;
Titanium Gr. 2 Lift Check Valve;
Titanium Gr. 2 Piston Check Valve;
Titanium Gr. 2 Wafer Check Valve;
Titanium Gr. 2 Triple Offset Butterfly Valve;
Titanium Gr. 2 Y Type Strainer;
Titanium Gr. 2 T Type Strainer;
Titanium Gr. 2 Basket Type Strainer;
Titanium Gr. 2 Diaphragm Valve;
Titanium Gr. 2 Spring Loaded Safety Valve.
Titanium Gr. 2 High Performance Ball Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 High Performance Ball Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Instrument Ball Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Instrument Ball Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Sleeve Plug Valve Design Acc. to API 599 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Wedge Gate Valve Design Acc. to API 603 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Wedge Gate Valve Design Acc. to API 602, Test Acc. to API 598;
Titanium Gr. 2 Wedge Gate Valve Design Acc. to EN 1984 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Globe Valve Design Acc. to BS 1873 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Globe Valve Design Acc. to API 602, Test Acc. to API 598;
Titanium Gr. 2 Globe Valve Design Acc. to EN 13709 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Swing Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Swing Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Lift Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Lift Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Piston Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Piston Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Wafer Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Wafer Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Check Valve Design Acc. to API 602, Test Acc. to API 598;
Titanium Gr. 2 Triple Offset Butterfly Valve Design Acc. to API 609 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Triple Offset Butterfly Valve Design Acc. to EN 593 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Y Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Y Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 T Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 T Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Basket Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Basket Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Diaphragm Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 2 Diaphragm Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 2 Spring Loaded Safety Valve Design Acc. to API 520 & API 526, Test Acc. to API 527;
Titanium Gr. 2 Spring Loaded Safety Valve Design Acc. to ISO 4126, Test Acc. to ISO 4126.
All Titanium Gr. 2 Valve surface is finely machined to achieve the required roughness and conforms to standard MSS SP-55.
From 1/4’’ to 48’’ (ANSI Standard Titanium Gr. 2 Valve);
From DN8 to DN1200 (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve).
Face to Face Acc. to ASME B16.10 (ANSI Standard Titanium Gr. 2 Valve);
Face to Face Acc. to EN 558-1 (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve).
ANSI Class 150 Titanium Gr. 2 Valve (ANSI Standard Titanium Gr. 2 Valve);
ANSI Class 300 Titanium Gr. 2 Valve (ANSI Standard Titanium Gr. 2 Valve);
ANSI Class 600 Titanium Gr. 2 Valve (ANSI Standard Titanium Gr. 2 Valve);
ANSI Class 800 Titanium Gr. 2 Valve (ANSI Standard Titanium Gr. 2 Valve);
ANSI Class 900 Titanium Gr. 2 Valve (ANSI Standard Titanium Gr. 2 Valve);
ANSI Class 1500 Titanium Gr. 2 Valve (ANSI Standard Titanium Gr. 2 Valve);
ANSI Class 2500 Titanium Gr. 2 Valve (ANSI Standard Titanium Gr. 2 Valve);
EN 1092 PN 16 Titanium Gr. 2 Valve (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve);
EN 1092 PN 25 Titanium Gr. 2 Valve (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve);
EN 1092 PN 40 Titanium Gr. 2 Valve (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve);
EN 1092 PN 63 Titanium Gr. 2 Valve (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve);
EN 1092 PN 100 Titanium Gr. 2 Valve (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve);
EN 1092 PN 160 Titanium Gr. 2 Valve (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve);
EN 1092 PN 250 Titanium Gr. 2 Valve (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve);
EN 1092 PN 320 Titanium Gr. 2 Valve (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve);
EN 1092 PN 400 Titanium Gr. 2 Valve (EN Standard Titanium Gr. 2 Valve, DIN Standard Titanium Gr. 2 Valve).
Please refer to the "Temperature and Pressure Curve of Titanium Gr. 2 Valve" for temperature and pressure changes.
ANSI Flange Ends Titanium Gr. 2 Valve;
ANSI Integral Flange Ends Titanium Gr. 2 Valve;
ANSI Welded Flange Ends Titanium Gr. 2 Valve;
Butt Weld (ASME B16.25) Ends Titanium Gr. 2 Valve;
Butt Weld x ANSI Flange Ends Titanium Gr. 2 Valve;
EN 1092 Flange Ends Titanium Gr. 2 Valve;
EN 1092 Integral Flange Ends Titanium Gr. 2 Valve;
EN 1092 Welded Flange Ends Titanium Gr. 2 Valve;
Butt Weld (EN 12627) Ends Titanium Gr. 2 Valve;
Butt Weld (ISO 1127) Ends Titanium Gr. 2 Valve;
Butt Weld x EN 1092 Flange Ends Titanium Gr. 2 Valve;
Male NPT (ASME B1.20.1) Ends Titanium Gr. 2 Valve;
Male BSPP (ISO 228-1) Ends Titanium Gr. 2 Valve;
Male BSPT (ISO 7-1) Ends Titanium Gr. 2 Valve;
Male NPT x Female NPT Ends Titanium Gr. 2 Valve;
Male BSPP x Female BSPP Ends Titanium Gr. 2 Valve;
Male BSPT x Female BSPT Ends Titanium Gr. 2 Valve;
Male NPT x Long Butt Weld (+100 mm) Ends Titanium Gr. 2 Valve;
Male BSPP x Long Butt Weld (+100 mm) Ends Titanium Gr. 2 Valve;
Male BSPT x Long Butt Weld (+100 mm) Ends Titanium Gr. 2 Valve;
Female NPT (ASME B1.20.1) Ends Titanium Gr. 2 Valve;
Female BSPP (ISO 228-1) Ends Titanium Gr. 2 Valve;
Female BSPT (ISO 7-1) Ends Titanium Gr. 2 Valve;
Socket Weld (ASME B16.11) Ends Titanium Gr. 2 Valve;
Socket Weld (EN 12760) Ends Titanium Gr. 2 Valve;
Female NPT x Socket Weld Ends Titanium Gr. 2 Valve;
Female BSPP x Socket Weld Ends Titanium Gr. 2 Valve;
Female BSPT x Socket Weld Ends Titanium Gr. 2 Valve;
Butt Weld (ASME B16.25) Ends Titanium Gr. 2 Valve;
Butt Weld (EN 12627) Ends Titanium Gr. 2 Valve;
Female NPT x Butt Weld Ends Titanium Gr. 2 Valve;
Female BSPP x Butt Weld Ends Titanium Gr. 2 Valve;
Female BSPT x Butt Weld Ends Titanium Gr. 2 Valve;
Female NPT x Long Butt Weld Ends (+100 mm) Ends Titanium Gr. 2 Valve;
Female BSPP x Long Butt Weld Ends (+100 mm) Ends Titanium Gr. 2 Valve;
Female BSPT x Long Butt Weld Ends (+100 mm) Ends Titanium Gr. 2 Valve;
Long Butt Weld Ends (+100 mm Weld Stub) Ends Titanium Gr. 2 Valve.
CE Marking is Available to Titanium Gr. 2 Valve with a Diameter of DN32 or Larger.
For the Chemical Composition of Titanium Gr. 2 Valve, please refer to EN 10204 Type 3.1 certificate.
For the Mechanical Properties of Titanium Gr. 2 Valve, please refer to EN 10204 Type 3.1 certificate.
All Titanium Gr. 2 Valve will be delivered with EN 10204 Type 3.1 Certificate.
Level Operation of Titanium Gr. 2 Valve;
Handwheel Operation of Titanium Gr. 2 Valve;
Pneumatic Actuator Operation of Titanium Gr. 2 Valve;
Electric Actuator Operation of Titanium Gr. 2 Valve.
MSS SP-55 Certified of Titanium Gr. 2 Valve;
NACE MR 0175 Certified of Titanium Gr. 2 Valve
API 607 Fire Safe Certified of Titanium Gr. 2 Valve;
ISO 9001 Certified of Titanium Gr. 2 Valve;
PED Certified of Titanium Gr. 2 Valve.
NACE MR0175 is available upon request of Titanium Gr. 2 Valve;
ATEX is available upon request of Titanium Gr. 2 Valve;
TA-LUFT is available upon request of Titanium Gr. 2 Valve;
SIL is available upon request of Titanium Gr. 2 Valve;
Degreasing is available upon request of Titanium Gr. 2 Valve;
Fire Safe is available upon request of Titanium Gr. 2 Valve;
Stem Extension is available upon request of Titanium Gr. 2 Valve;
Double Block and Bleed is available upon request of Titanium Gr. 2 Valve.
Titanium Gr. 3 Ball Valve;
Titanium Gr. 3 Instrument Ball Valve;
Titanium Gr. 3 Sleeve Plug Valve;
Titanium Gr. 3 Wedge Gate Valve;
Titanium Gr. 3 Globe Valve;
Titanium Gr. 3 Swing Check Valve;
Titanium Gr. 3 Lift Check Valve;
Titanium Gr. 3 Piston Check Valve;
Titanium Gr. 3 Wafer Check Valve;
Titanium Gr. 3 Triple Offset Butterfly Valve;
Titanium Gr. 3 Y Type Strainer;
Titanium Gr. 3 T Type Strainer;
Titanium Gr. 3 Basket Type Strainer;
Titanium Gr. 3 Diaphragm Valve;
Titanium Gr. 3 Spring Loaded Safety Valve.
Titanium Gr. 3 High Performance Ball Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 High Performance Ball Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Instrument Ball Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Instrument Ball Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Sleeve Plug Valve Design Acc. to API 599 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Wedge Gate Valve Design Acc. to API 603 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Wedge Gate Valve Design Acc. to API 602, Test Acc. to API 598;
Titanium Gr. 3 Wedge Gate Valve Design Acc. to EN 1984 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Globe Valve Design Acc. to BS 1873 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Globe Valve Design Acc. to API 602, Test Acc. to API 598;
Titanium Gr. 3 Globe Valve Design Acc. to EN 13709 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Swing Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Swing Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Lift Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Lift Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Piston Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Piston Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Wafer Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Wafer Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Check Valve Design Acc. to API 602, Test Acc. to API 598;
Titanium Gr. 3 Triple Offset Butterfly Valve Design Acc. to API 609 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Triple Offset Butterfly Valve Design Acc. to EN 593 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Y Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Y Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 T Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 T Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Basket Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Basket Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Diaphragm Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 3 Diaphragm Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 3 Spring Loaded Safety Valve Design Acc. to API 520 & API 526, Test Acc. to API 527;
Titanium Gr. 3 Spring Loaded Safety Valve Design Acc. to ISO 4126, Test Acc. to ISO 4126.
All Titanium Gr. 3 Valve surface is finely machined to achieve the required roughness and conforms to standard MSS SP-55.
From 1/4’’ to 48’’ (ANSI Standard Titanium Gr. 3 Valve);
From DN8 to DN1200 (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve).
Face to Face Acc. to ASME B16.10 (ANSI Standard Titanium Gr. 3 Valve);
Face to Face Acc. to EN 558-1 (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve).
ANSI Class 150 Titanium Gr. 3 Valve (ANSI Standard Titanium Gr. 3 Valve);
ANSI Class 300 Titanium Gr. 3 Valve (ANSI Standard Titanium Gr. 3 Valve);
ANSI Class 600 Titanium Gr. 3 Valve (ANSI Standard Titanium Gr. 3 Valve);
ANSI Class 800 Titanium Gr. 3 Valve (ANSI Standard Titanium Gr. 3 Valve);
ANSI Class 900 Titanium Gr. 3 Valve (ANSI Standard Titanium Gr. 3 Valve);
ANSI Class 1500 Titanium Gr. 3 Valve (ANSI Standard Titanium Gr. 3 Valve);
ANSI Class 2500 Titanium Gr. 3 Valve (ANSI Standard Titanium Gr. 3 Valve);
EN 1092 PN 16 Titanium Gr. 3 Valve (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve);
EN 1092 PN 25 Titanium Gr. 3 Valve (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve);
EN 1092 PN 40 Titanium Gr. 3 Valve (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve);
EN 1092 PN 63 Titanium Gr. 3 Valve (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve);
EN 1092 PN 100 Titanium Gr. 3 Valve (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve);
EN 1092 PN 160 Titanium Gr. 3 Valve (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve);
EN 1092 PN 250 Titanium Gr. 3 Valve (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve);
EN 1092 PN 320 Titanium Gr. 3 Valve (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve);
EN 1092 PN 400 Titanium Gr. 3 Valve (EN Standard Titanium Gr. 3 Valve, DIN Standard Titanium Gr. 3 Valve).
Please refer to the "Temperature and Pressure Curve of Titanium Gr. 3 Valve" for temperature and pressure changes.
ANSI Flange Ends Titanium Gr. 3 Valve;
ANSI Integral Flange Ends Titanium Gr. 3 Valve;
ANSI Welded Flange Ends Titanium Gr. 3 Valve;
Butt Weld (ASME B16.25) Ends Titanium Gr. 3 Valve;
Butt Weld x ANSI Flange Ends Titanium Gr. 3 Valve;
EN 1092 Flange Ends Titanium Gr. 3 Valve;
EN 1092 Integral Flange Ends Titanium Gr. 3 Valve;
EN 1092 Welded Flange Ends Titanium Gr. 3 Valve;
Butt Weld (EN 12627) Ends Titanium Gr. 3 Valve;
Butt Weld (ISO 1127) Ends Titanium Gr. 3 Valve;
Butt Weld x EN 1092 Flange Ends Titanium Gr. 3 Valve;
Male NPT (ASME B1.20.1) Ends Titanium Gr. 3 Valve;
Male BSPP (ISO 228-1) Ends Titanium Gr. 3 Valve;
Male BSPT (ISO 7-1) Ends Titanium Gr. 3 Valve;
Male NPT x Female NPT Ends Titanium Gr. 3 Valve;
Male BSPP x Female BSPP Ends Titanium Gr. 3 Valve;
Male BSPT x Female BSPT Ends Titanium Gr. 3 Valve;
Male NPT x Long Butt Weld (+100 mm) Ends Titanium Gr. 3 Valve;
Male BSPP x Long Butt Weld (+100 mm) Ends Titanium Gr. 3 Valve;
Male BSPT x Long Butt Weld (+100 mm) Ends Titanium Gr. 3 Valve;
Female NPT (ASME B1.20.1) Ends Titanium Gr. 3 Valve;
Female BSPP (ISO 228-1) Ends Titanium Gr. 3 Valve;
Female BSPT (ISO 7-1) Ends Titanium Gr. 3 Valve;
Socket Weld (ASME B16.11) Ends Titanium Gr. 3 Valve;
Socket Weld (EN 12760) Ends Titanium Gr. 3 Valve;
Female NPT x Socket Weld Ends Titanium Gr. 3 Valve;
Female BSPP x Socket Weld Ends Titanium Gr. 3 Valve;
Female BSPT x Socket Weld Ends Titanium Gr. 3 Valve;
Butt Weld (ASME B16.25) Ends Titanium Gr. 3 Valve;
Butt Weld (EN 12627) Ends Titanium Gr. 3 Valve;
Female NPT x Butt Weld Ends Titanium Gr. 3 Valve;
Female BSPP x Butt Weld Ends Titanium Gr. 3 Valve;
Female BSPT x Butt Weld Ends Titanium Gr. 3 Valve;
Female NPT x Long Butt Weld Ends (+100 mm) Ends Titanium Gr. 3 Valve;
Female BSPP x Long Butt Weld Ends (+100 mm) Ends Titanium Gr. 3 Valve;
Female BSPT x Long Butt Weld Ends (+100 mm) Ends Titanium Gr. 3 Valve;
Long Butt Weld Ends (+100 mm Weld Stub) Ends Titanium Gr. 3 Valve.
CE Marking is Available to Titanium Gr. 3 Valve with a Diameter of DN32 or Larger.
For the Chemical Composition of Titanium Gr. 3 Valve, please refer to EN 10204 Type 3.1 certificate.
For the Mechanical Properties of Titanium Gr. 3 Valve, please refer to EN 10204 Type 3.1 certificate.
All Titanium Gr. 3 Valve will be delivered with EN 10204 Type 3.1 Certificate.
Level Operation of Titanium Gr. 3 Valve;
Handwheel Operation of Titanium Gr. 3 Valve;
Pneumatic Actuator Operation of Titanium Gr. 3 Valve;
Electric Actuator Operation of Titanium Gr. 3 Valve.
MSS SP-55 Certified of Titanium Gr. 3 Valve;
NACE MR 0175 Certified of Titanium Gr. 3 Valve
API 607 Fire Safe Certified of Titanium Gr. 3 Valve;
ISO 9001 Certified of Titanium Gr. 3 Valve;
PED Certified of Titanium Gr. 3 Valve.
NACE MR0175 is available upon request of Titanium Gr. 3 Valve;
ATEX is available upon request of Titanium Gr. 3 Valve;
TA-LUFT is available upon request of Titanium Gr. 3 Valve;
SIL is available upon request of Titanium Gr. 3 Valve;
Degreasing is available upon request of Titanium Gr. 3 Valve;
Fire Safe is available upon request of Titanium Gr. 3 Valve;
Stem Extension is available upon request of Titanium Gr. 3 Valve;
Double Block and Bleed is available upon request of Titanium Gr. 3 Valve.
Titanium Gr. 10 Ball Valve;
Titanium Gr. 10 Instrument Ball Valve;
Titanium Gr. 10 Sleeve Plug Valve;
Titanium Gr. 10 Wedge Gate Valve;
Titanium Gr. 10 Globe Valve;
Titanium Gr. 10 Swing Check Valve;
Titanium Gr. 10 Lift Check Valve;
Titanium Gr. 10 Piston Check Valve;
Titanium Gr. 10 Wafer Check Valve;
Titanium Gr. 10 Triple Offset Butterfly Valve;
Titanium Gr. 10 Y Type Strainer;
Titanium Gr. 10 T Type Strainer;
Titanium Gr. 10 Basket Type Strainer;
Titanium Gr. 10 Diaphragm Valve;
Titanium Gr. 10 Spring Loaded Safety Valve.
Titanium Gr. 10 High Performance Ball Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 High Performance Ball Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Instrument Ball Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Instrument Ball Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Sleeve Plug Valve Design Acc. to API 599 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Wedge Gate Valve Design Acc. to API 603 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Wedge Gate Valve Design Acc. to API 602, Test Acc. to API 598;
Titanium Gr. 10 Wedge Gate Valve Design Acc. to EN 1984 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Globe Valve Design Acc. to BS 1873 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Globe Valve Design Acc. to API 602, Test Acc. to API 598;
Titanium Gr. 10 Globe Valve Design Acc. to EN 13709 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Swing Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Swing Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Lift Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Lift Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Piston Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Piston Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Wafer Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Wafer Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Check Valve Design Acc. to API 602, Test Acc. to API 598;
Titanium Gr. 10 Triple Offset Butterfly Valve Design Acc. to API 609 & ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Triple Offset Butterfly Valve Design Acc. to EN 593 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Y Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Y Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 T Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 T Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Basket Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Basket Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Diaphragm Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
Titanium Gr. 10 Diaphragm Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
Titanium Gr. 10 Spring Loaded Safety Valve Design Acc. to API 520 & API 526, Test Acc. to API 527;
Titanium Gr. 10 Spring Loaded Safety Valve Design Acc. to ISO 4126, Test Acc. to ISO 4126.
All Titanium Gr. 10 Valve surface is finely machined to achieve the required roughness and conforms to standard MSS SP-55.
From 1/4’’ to 48’’ (ANSI Standard Titanium Gr. 10 Valve);
From DN8 to DN1200 (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve).
Face to Face Acc. to ASME B16.10 (ANSI Standard Titanium Gr. 10 Valve);
Face to Face Acc. to EN 558-1 (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve).
ANSI Class 150 Titanium Gr. 10 Valve (ANSI Standard Titanium Gr. 10 Valve);
ANSI Class 300 Titanium Gr. 10 Valve (ANSI Standard Titanium Gr. 10 Valve);
ANSI Class 600 Titanium Gr. 10 Valve (ANSI Standard Titanium Gr. 10 Valve);
ANSI Class 800 Titanium Gr. 10 Valve (ANSI Standard Titanium Gr. 10 Valve);
ANSI Class 900 Titanium Gr. 10 Valve (ANSI Standard Titanium Gr. 10 Valve);
ANSI Class 1500 Titanium Gr. 10 Valve (ANSI Standard Titanium Gr. 10 Valve);
ANSI Class 2500 Titanium Gr. 10 Valve (ANSI Standard Titanium Gr. 10 Valve);
EN 1092 PN 16 Titanium Gr. 10 Valve (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve);
EN 1092 PN 25 Titanium Gr. 10 Valve (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve);
EN 1092 PN 40 Titanium Gr. 10 Valve (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve);
EN 1092 PN 63 Titanium Gr. 10 Valve (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve);
EN 1092 PN 100 Titanium Gr. 10 Valve (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve);
EN 1092 PN 160 Titanium Gr. 10 Valve (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve);
EN 1092 PN 250 Titanium Gr. 10 Valve (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve);
EN 1092 PN 320 Titanium Gr. 10 Valve (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve);
EN 1092 PN 400 Titanium Gr. 10 Valve (EN Standard Titanium Gr. 10 Valve, DIN Standard Titanium Gr. 10 Valve).
Please refer to the "Temperature and Pressure Curve of Titanium Gr. 10 Valve" for temperature and pressure changes.
ANSI Flange Ends Titanium Gr. 10 Valve;
ANSI Integral Flange Ends Titanium Gr. 10 Valve;
ANSI Welded Flange Ends Titanium Gr. 10 Valve;
Butt Weld (ASME B16.25) Ends Titanium Gr. 10 Valve;
Butt Weld x ANSI Flange Ends Titanium Gr. 10 Valve;
EN 1092 Flange Ends Titanium Gr. 10 Valve;
EN 1092 Integral Flange Ends Titanium Gr. 10 Valve;
EN 1092 Welded Flange Ends Titanium Gr. 10 Valve;
Butt Weld (EN 12627) Ends Titanium Gr. 10 Valve;
Butt Weld (ISO 1127) Ends Titanium Gr. 10 Valve;
Butt Weld x EN 1092 Flange Ends Titanium Gr. 10 Valve;
Male NPT (ASME B1.20.1) Ends Titanium Gr. 10 Valve;
Male BSPP (ISO 228-1) Ends Titanium Gr. 10 Valve;
Male BSPT (ISO 7-1) Ends Titanium Gr. 10 Valve;
Male NPT x Female NPT Ends Titanium Gr. 10 Valve;
Male BSPP x Female BSPP Ends Titanium Gr. 10 Valve;
Male BSPT x Female BSPT Ends Titanium Gr. 10 Valve;
Male NPT x Long Butt Weld (+100 mm) Ends Titanium Gr. 10 Valve;
Male BSPP x Long Butt Weld (+100 mm) Ends Titanium Gr. 10 Valve;
Male BSPT x Long Butt Weld (+100 mm) Ends Titanium Gr. 10 Valve;
Female NPT (ASME B1.20.1) Ends Titanium Gr. 10 Valve;
Female BSPP (ISO 228-1) Ends Titanium Gr. 10 Valve;
Female BSPT (ISO 7-1) Ends Titanium Gr. 10 Valve;
Socket Weld (ASME B16.11) Ends Titanium Gr. 10 Valve;
Socket Weld (EN 12760) Ends Titanium Gr. 10 Valve;
Female NPT x Socket Weld Ends Titanium Gr. 10 Valve;
Female BSPP x Socket Weld Ends Titanium Gr. 10 Valve;
Female BSPT x Socket Weld Ends Titanium Gr. 10 Valve;
Butt Weld (ASME B16.25) Ends Titanium Gr. 10 Valve;
Butt Weld (EN 12627) Ends Titanium Gr. 10 Valve;
Female NPT x Butt Weld Ends Titanium Gr. 10 Valve;
Female BSPP x Butt Weld Ends Titanium Gr. 10 Valve;
Female BSPT x Butt Weld Ends Titanium Gr. 10 Valve;
Female NPT x Long Butt Weld Ends (+100 mm) Ends Titanium Gr. 10 Valve;
Female BSPP x Long Butt Weld Ends (+100 mm) Ends Titanium Gr. 10 Valve;
Female BSPT x Long Butt Weld Ends (+100 mm) Ends Titanium Gr. 10 Valve;
Long Butt Weld Ends (+100 mm Weld Stub) Ends Titanium Gr. 10 Valve.
CE Marking is Available to Titanium Gr. 10 Valve with a Diameter of DN32 or Larger.
For the Chemical Composition of Titanium Gr. 10 Valve, please refer to EN 10204 Type 3.1 certificate.
For the Mechanical Properties of Titanium Gr. 10 Valve, please refer to EN 10204 Type 3.1 certificate.
All Titanium Gr. 10 Valve will be delivered with EN 10204 Type 3.1 Certificate.
Level Operation of Titanium Gr. 10 Valve;
Handwheel Operation of Titanium Gr. 10 Valve;
Pneumatic Actuator Operation of Titanium Gr. 10 Valve;
Electric Actuator Operation of Titanium Gr. 10 Valve.
MSS SP-55 Certified of Titanium Gr. 10 Valve;
NACE MR 0175 Certified of Titanium Gr. 10 Valve
API 607 Fire Safe Certified of Titanium Gr. 10 Valve;
ISO 9001 Certified of Titanium Gr. 10 Valve;
PED Certified of Titanium Gr. 10 Valve.
NACE MR0175 is available upon request of Titanium Gr. 10 Valve;
ATEX is available upon request of Titanium Gr. 10 Valve;
TA-LUFT is available upon request of Titanium Gr. 10 Valve;
SIL is available upon request of Titanium Gr. 10 Valve;
Degreasing is available upon request of Titanium Gr. 10 Valve;
Fire Safe is available upon request of Titanium Gr. 10 Valve;
Stem Extension is available upon request of Titanium Gr. 10 Valve;
Double Block and Bleed is available upon request of Titanium Gr. 10 Valve.
UNS R50400 Ball Valve;
UNS R50400 Instrument Ball Valve;
UNS R50400 Sleeve Plug Valve;
UNS R50400 Wedge Gate Valve;
UNS R50400 Globe Valve;
UNS R50400 Swing Check Valve;
UNS R50400 Lift Check Valve;
UNS R50400 Piston Check Valve;
UNS R50400 Wafer Check Valve;
UNS R50400 Triple Offset Butterfly Valve;
UNS R50400 Y Type Strainer;
UNS R50400 T Type Strainer;
UNS R50400 Basket Type Strainer;
UNS R50400 Diaphragm Valve;
UNS R50400 Spring Loaded Safety Valve.
UNS R50400 High Performance Ball Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
UNS R50400 High Performance Ball Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Instrument Ball Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
UNS R50400 Instrument Ball Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Sleeve Plug Valve Design Acc. to API 599 & ASME B16.34, Test Acc. to API 598;
UNS R50400 Wedge Gate Valve Design Acc. to API 603 & ASME B16.34, Test Acc. to API 598;
UNS R50400 Wedge Gate Valve Design Acc. to API 602, Test Acc. to API 598;
UNS R50400 Wedge Gate Valve Design Acc. to EN 1984 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Globe Valve Design Acc. to BS 1873 & ASME B16.34, Test Acc. to API 598;
UNS R50400 Globe Valve Design Acc. to API 602, Test Acc. to API 598;
UNS R50400 Globe Valve Design Acc. to EN 13709 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Swing Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
UNS R50400 Swing Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Lift Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
UNS R50400 Lift Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Piston Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
UNS R50400 Piston Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Wafer Check Valve Design Acc. to API 594 & ASME B16.34, Test Acc. to API 598;
UNS R50400 Wafer Check Valve Design Acc. to EN 16767 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Check Valve Design Acc. to API 602, Test Acc. to API 598;
UNS R50400 Triple Offset Butterfly Valve Design Acc. to API 609 & ASME B16.34, Test Acc. to API 598;
UNS R50400 Triple Offset Butterfly Valve Design Acc. to EN 593 & EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Y Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
UNS R50400 Y Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 T Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
UNS R50400 T Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Basket Type Strainer Design Acc. to ASME B16.34, Test Acc. to API 598;
UNS R50400 Basket Type Strainer Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Diaphragm Valve Design Acc. to ASME B16.34, Test Acc. to API 598;
UNS R50400 Diaphragm Valve Design Acc. to EN 12516-1/2, Test Acc. to EN 12266-1/2;
UNS R50400 Spring Loaded Safety Valve Design Acc. to API 520 & API 526, Test Acc. to API 527;
UNS R50400 Spring Loaded Safety Valve Design Acc. to ISO 4126, Test Acc. to ISO 4126.
All UNS R50400 Valve surface is finely machined to achieve the required roughness and conforms to standard MSS SP-55.
From 1/4’’ to 48’’ (ANSI Standard UNS R50400 Valve);
From DN8 to DN1200 (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve).
Face to Face Acc. to ASME B16.10 (ANSI Standard UNS R50400 Valve);
Face to Face Acc. to EN 558-1 (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve).
ANSI Class 150 UNS R50400 Valve (ANSI Standard UNS R50400 Valve);
ANSI Class 300 UNS R50400 Valve (ANSI Standard UNS R50400 Valve);
ANSI Class 600 UNS R50400 Valve (ANSI Standard UNS R50400 Valve);
ANSI Class 800 UNS R50400 Valve (ANSI Standard UNS R50400 Valve);
ANSI Class 900 UNS R50400 Valve (ANSI Standard UNS R50400 Valve);
ANSI Class 1500 UNS R50400 Valve (ANSI Standard UNS R50400 Valve);
ANSI Class 2500 UNS R50400 Valve (ANSI Standard UNS R50400 Valve);
EN 1092 PN 16 UNS R50400 Valve (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve);
EN 1092 PN 25 UNS R50400 Valve (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve);
EN 1092 PN 40 UNS R50400 Valve (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve);
EN 1092 PN 63 UNS R50400 Valve (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve);
EN 1092 PN 100 UNS R50400 Valve (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve);
EN 1092 PN 160 UNS R50400 Valve (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve);
EN 1092 PN 250 UNS R50400 Valve (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve);
EN 1092 PN 320 UNS R50400 Valve (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve);
EN 1092 PN 400 UNS R50400 Valve (EN Standard UNS R50400 Valve, DIN Standard UNS R50400 Valve).
Please refer to the "Temperature and Pressure Curve of UNS R50400 Valve" for temperature and pressure changes.
ANSI Flange Ends UNS R50400 Valve;
ANSI Integral Flange Ends UNS R50400 Valve;
ANSI Welded Flange Ends UNS R50400 Valve;
Butt Weld (ASME B16.25) Ends UNS R50400 Valve;
Butt Weld x ANSI Flange Ends UNS R50400 Valve;
EN 1092 Flange Ends UNS R50400 Valve;
EN 1092 Integral Flange Ends UNS R50400 Valve;
EN 1092 Welded Flange Ends UNS R50400 Valve;
Butt Weld (EN 12627) Ends UNS R50400 Valve;
Butt Weld (ISO 1127) Ends UNS R50400 Valve;
Butt Weld x EN 1092 Flange Ends UNS R50400 Valve;
Male NPT (ASME B1.20.1) Ends UNS R50400 Valve;
Male BSPP (ISO 228-1) Ends UNS R50400 Valve;
Male BSPT (ISO 7-1) Ends UNS R50400 Valve;
Male NPT x Female NPT Ends UNS R50400 Valve;
Male BSPP x Female BSPP Ends UNS R50400 Valve;
Male BSPT x Female BSPT Ends UNS R50400 Valve;
Male NPT x Long Butt Weld (+100 mm) Ends UNS R50400 Valve;
Male BSPP x Long Butt Weld (+100 mm) Ends UNS R50400 Valve;
Male BSPT x Long Butt Weld (+100 mm) Ends UNS R50400 Valve;
Female NPT (ASME B1.20.1) Ends UNS R50400 Valve;
Female BSPP (ISO 228-1) Ends UNS R50400 Valve;
Female BSPT (ISO 7-1) Ends UNS R50400 Valve;
Socket Weld (ASME B16.11) Ends UNS R50400 Valve;
Socket Weld (EN 12760) Ends UNS R50400 Valve;
Female NPT x Socket Weld Ends UNS R50400 Valve;
Female BSPP x Socket Weld Ends UNS R50400 Valve;
Female BSPT x Socket Weld Ends UNS R50400 Valve;
Butt Weld (ASME B16.25) Ends UNS R50400 Valve;
Butt Weld (EN 12627) Ends UNS R50400 Valve;
Female NPT x Butt Weld Ends UNS R50400 Valve;
Female BSPP x Butt Weld Ends UNS R50400 Valve;
Female BSPT x Butt Weld Ends UNS R50400 Valve;
Female NPT x Long Butt Weld Ends (+100 mm) Ends UNS R50400 Valve;
Female BSPP x Long Butt Weld Ends (+100 mm) Ends UNS R50400 Valve;
Female BSPT x Long Butt Weld Ends (+100 mm) Ends UNS R50400 Valve;
Long Butt Weld Ends (+100 mm Weld Stub) Ends UNS R50400 Valve.
CE Marking is Available to UNS R50400 Valve with a Diameter of DN32 or Larger.
For the Chemical Composition of UNS R50400 Valve, please refer to EN 10204 Type 3.1 certificate.
For the Mechanical Properties of UNS R50400 Valve, please refer to EN 10204 Type 3.1 certificate.
All UNS R50400 Valve will be delivered with EN 10204 Type 3.1 Certificate.
Level Operation of UNS R50400 Valve;
Handwheel Operation of UNS R50400 Valve;
Pneumatic Actuator Operation of UNS R50400 Valve;
Electric Actuator Operation of UNS R50400 Valve.
MSS SP-55 Certified of UNS R50400 Valve;
NACE MR 0175 Certified of UNS R50400 Valve
API 607 Fire Safe Certified of UNS R50400 Valve;
ISO 9001 Certified of UNS R50400 Valve;
PED Certified of UNS R50400 Valve.
NACE MR0175 is available upon request of UNS R50400 Valve;
ATEX is available upon request of UNS R50400 Valve;
TA-LUFT is available upon request of UNS R50400 Valve;
SIL is available upon request of UNS R50400 Valve;
Degreasing is available upon request of UNS R50400 Valve;
Fire Safe is available upon request of UNS R50400 Valve;
Stem Extension is available upon request of UNS R50400 Valve;
Double Block and Bleed is available upon request of UNS R50400 Valve.