The BEV-Boer Valve Y Type Strainers are constructed from rugged castings that are machined to exacting specifications. These bodies have drilled flanges that are in accordance with ASME B16.1. Alternatively to EN, DIN, BS or JIS Standards.

The BEV-Boer Valve Y Strainer features a machined groove in both the body and cover for proper screen alignment and to ensure accurate reseating when servicing is required. The gasket is a synthetic fiber that is compressed between the body and cover for maximum strength and durability. Upon request, The BEV-Boer Valve Y Type strainers can be furnished with a blow-off plug. Standard perforated 304 stainless steel screens are furnished for a maximum strength. Different size perforations and meshes are available in stainless steel, monel, and brass to meet specific media requirements. If the media is not indicated, screens for water will be supplied. Self cleaning is accomplished by opening the valve or drain plug connected to the blow-off port.

Cast Y Strainer take their name from their configuration. They are most commonly used in pressurized lines, gas or liquid, but can also be used in suction or vacauum conditions. They are intended for application where small amounts of solid particulate are expected and where clean-out will be infrequent. If solids will flush easily from the screen, and fluid can be exhausted to atmosphere, a blow-down valve on the drain port will allow clean-out without removal of screen, and without interrupting the process flow.

» Manufactured under ISO 9001:2008 Management System

»SizeRanges: 1 1/2” through 24”

» Pressure Ratings: ANSI #150 to 2500, PN16~PN420

» Standards compliance: ASME B16.34, DIN 3202, ASME B16.10, MSS SP-71, BS EN558, ASME B16.1 CLASS 125, ASME B16.5 CL150, EN1092, EN12226, ISO 5208, API 598 or equivalents

» Materials: Cast Iron, Ductile Iron, Cast Carbon Steel, Cast Stainless Steel, Cast Duplex or Other Specials

» Ends Connections: Flanged(FF, RF, RTJ) to international standards

» Screen: Stainless Steel, Gr. 304 or 316

» Fusion Bonded Epoxy Coating

» Threaded Drain Plug Device

Filter

Bøttefilter

Smussfilter

Y-type

Størrelser: Fra 3/4" og opptil 48"

Trykklasser: PN6 – PN40, ANSI 150 – 600

Filter level: 5, 10, 25 micron.

Endetilkobling: Flenser, genger, sveise ender

Materialer: Carbon steel, Stainless steel and other exotic materials on request.

Spätné klapky a filtre z liatej ocele ASME 150 – 2500 lbs, 2“-24“

Špecifikácia:

Y-prevedenie filtra:

Skrutkovaná nadstavba s odkaľovacou skrut.

Perforované nerezové sito

Spätná klapka:

Závesný typ platne spätnej klapky

Platňa proti otáčaniu

Skrutkovaná nadstavba

Vymeniteľné sedlá

Dodávka vrátane materiálového certifikátu EN 10204 3.1

Označovanie podľa P.E.D. (97/23/EC)      

Na požiadanie aj NACE MR 01.75 / ATEX

Pripojenie:

Príruby podľa ASME B 16.05 RF, RTJ

Navárací koniec podľa ASME B16.25

Materiály:  ASTM A216WCB, A217-WC6, A352-LCB

Suodattimet höyrylle ja lauhteelle

Suodattimien eli lianerottimien tehtävä on suojata prosessia epäpuhtauksilta.

Oikeaoppisilla lianerottimien asennuksilla voidaan aikaansaada tuntuvia säästöjä järjestelmien huollossa.

Ohjelmaamme kuuluvat perinteiset käsin huollettavat lianerottimet ja korisuodattimet sekä modernit automaattisesti itsepuhdistuvat suodattimet, jotka löydät prosessiventtiiliohjelmistostamme. 

Suodattimien suodatustehoa voidaan parantaa siihen asennettavalla hienosihdillä.

DN 15-300

PN 16-40

Laipoin, hitsauspäin

GG-25, GGG 40.3, GS-C 25, AISI 316

Strainers

Фильтры

Filtres

HVATAČI NEČISTOĆA

Hvatači nečistoća su zatvorene posude, koje prikupljaju krute čestice što se odvajaju dok fluid prolazi kroz prijenosno sito. Hvatači nečistoća mogu prikupiti čestice do 0.001 inča u promjeru. Oni mogu ukloniti više od nepoželjnog materijala. Oni se također mogu ukloniti željene materijale, koji se mogu koristiti na drugom mjestu ili drugim postupcima. Možete pronaći hvatače nečistoća uzvodno od osjetljive opreme poput mjerača, pumpi, kompresora, ventila i filtera. Hvatači nečistoća i filteri su u osnovi ista stvar. Razlika je u tome što filter uklanja mnogo manjih čestica, te čestice obično se ne mogu vidjeti. Ako ne možete vidjeti materijal se uklanja, obično se to naziva filter.

Postoje hvatači nečistoća u gotovo svakoj industriji: kemijska, prehrambena, industrija vode, nafte, boja i itd. Hvatači nečistoća dolaze u različitim konfiguracijama:

Materijali:

ljevano željezo

kovani čelik

bronca

mesing

nehrđajući čelik

Konstrukcijske izvedbe

• Y hvatači nečistoća – Y Strainers

Sa navojnim krajevima DIN (BSP) i ANSI (NPT)

Sa krajevima za zavarivanje na cijev

Sa prirubničkim krajevima DIN i ANSI